TV Aerial Installation Tallebudgera

Tallebudgera TV Aerial Signal Boosters

Fix Pixelation Ph 0484 342 222

tallebudgera tv aerial signal booster fix pixelation

"Rated 1# on the G.C, hey presto! And it's fixed!"

Call Dan 0484 342 222 Your local Tallebudgera TV aerial, signal booster / amplifier expert

"Luey couldn't get any TV channels after the recent storm that hit Tallebudgera and called out TV Magic to help him. When we arrived we found his masthead amplifier / booster had fallen off the mast and filled up with water (a common situation) which means it's now buggered, as they are electronic. While we were on the roof we noticed his TV aerial was also in bad shape with a lot of the elements broken from the hail. We ended installing a new TV aerial as well to fix his bad TV reception and channel pixelation for the long term."

5 Things that can stop a masthead amplifier / tv signal booster from working.

  1. No powerMasthead amplifiers require a power source to work, these are commonly referred to as "boosters" by customers whom don't know what the power source actually is. It can be located inside the roof cavity on plugged into a TV aerial wall socket.
  2. The splitter. If you're splitter is in bad order or not hard wired correctly to the location that you want the booster to live then your aerial amplifier is not going to power up and work.
  3. DIY coax connectors. It may look easy to do some of the things that we do but the devil is in the detail, the very fine detail in fact. Although it may look simple to put a connector on some coax cable if you really don't know what you're doing there are many mistakes you can make, most of which will stop power getting through from your booster to the masthead amplifier properly.
  4. Faulty coax cable. The coax you're using to send power up the line to the tv aerial booster to stop the channel pixelation must be in good order. There's usually no visible signs and can only be diagnosed by a professional with industry equipment.
  5. Faulty wall plates. It is very common that you will need to replace the wall plate when installing a new booster power injector in Tallebudgera, as like everywhere else the wall plates corrode and prevent a solid power connection to your masthead amplifier. We always change these when installing new boosters at homes.

A real-life example from today, 12th March 2019 follows:

"Garrett was having trouble getting perfect TV reception at his brand-new home in Tallebudgera. Although he had a brand-new TV aerial installed, it was of poor quality, wasn't producing enough signal and was probably installed by the builder or an electrician without the correct tools and industry expertise (as usual for a new build unfortunately). Which showed Garrett the difference between a TV aerial we recommend and what he had and also explained that he's going to need a signal amplifier / booster to fix the channel pixelation. Basically the location and size of his home was too demanding of an un-aided TV aerial on its own."

Need help with fixing your TV Aerial reception and channel pixelation in Tallebudgera Gold Coast?

Dan's the man, anything TV, Associated Equipment & Antenna related. Call 0484 324 222.

We service the whole Gold Coast with local TV technicians.

book online